Shown with brush D.C. motor

BTC - II Series

Dual Head
Miniature Diaphragm Pump
and Compressor.English/Metric

General Specifications Series Parallel
Pressure Range*
---
 0-28 psig/193 kPa
Vacuum Range* 0 - 25 in Hg/635 mmHg 0-20 in Hg/508 mmHg
Max. Unrestricted Flow 6.0 LPM 11 LPM
  * Extended pressure and vacuum capabilities available upon request.
DESCRIPTION
BTC- II Dual Head Miniature Diaphragm Pumps and Compressors are a series of brush DC motor-driven pumps tailored to meet the specific performance requirements of your applications. These pumps are designed to handle both gases and liquids.
DYNAMIC BENEFITS
  • Longevity: The BTC-II is configured with a dual ball bearing brush motor, along with our long life pump head technology. The pump will last the life of the motor, or up to 3,000 hours of high intermittent usage. For exceptional life performance with our BLDC motor, use the BTC-IIS.
  • Light Weight, Compact Size: The BTC-II Series pump design has a unique compact configuration allowing designers to minimize system weight and allotted space requirement for pumps and compressors.
  • Flexible Mounting Options:The BTC-II maximizes mounting flexibility by offering several ways to mount the pump, as well as four possible port orientations.
  • Contamination-Free: Hargraves takes the necessary steps in manufacturing to assure that our 100% oil-free pump and compressor designs maintain the purity of your system. Hargraves pumps and compressors are commonly used in FDA-approved systems.
  • Dynamically Balanced: The BTC-II Series pump design is uniquely balanced to minimize vibration and maximize life.
OVERALL PERFORMANCE RANGE

Above performance ranges illustrate overall performance for all BTC-II dual-headed pumps handling air. Performance will vary depending on barometric pressure and
media temperature. Consult the factory with your specific requirements. See the BTC Series data sheet for single head performance.
BTC-II Series
 
STANDARD MOTOR OPTIONS   FEATURES

B. Brush Dual Ball Bearings

   All available in
6, 12 or 24 VDC*


The operating current varies from voltage, flow and pressure requirements.

*Other voltages available upon request		    
 

Ports are barbed for 1/8" I.D. flexible tubing.

Head Configuration available in any one of four positions.

Mounting Holes are drilled to accommodate 6-20 self-tapping screws. Other options available upon request.
OPERATING ENVIRONMENT   MATERIALS

Temperature

 Humidity Position Media Noise Level

5º - 70º * C

 0 - 95% RH Any Most gases
and liquids		 As low as
45 dB
*Duty dependent. Consult factory for high temperature applications over 50º C.
 

Materials of construction are selected to meet OEM application-specific requirements.

OUTLINE DIAGRAMS - OVERALL DIMENSIONS AND MOUNTING OPTIONS

Mounting hole options seen in views: A and E. Mounting option E standard.
For additional mounting options consult the factory.